Shop by Category
Toroid Insert Grade Selection
Shock & Wear Resistance | Uncoated (Base Grade) | with Coating | Description | Specifications |
---|---|---|---|---|
TOUGHEST Shock Resistance |
DMK30 | Moderate wear resistance/high shock resistance. Recommended for interrupted or unstable steel, most stainless steel, high-temperature alloys, and cast iron applications. | ANSI C1-C2, ISO K25-K40, M25-M35 |
|
DMK30-TCI | High-performance medium- to high-temperature grade. Outstanding shock and wear resistance in steels, irons, and stainless steels. Best suited for materials < 44 Rc. | |||
DMK30-GLH | Premium high-temperature coating. Good resistance to heat for high-shock applications. Excellent for tough stainless steels, high-temperature alloys, and many tool steels. | |||
NEW | DMK30-HM | Same tough carbide substrate, but with a higher-temperature coating. Usually used for high-temperature alloys or tough stainless steels. | ||
MEDIUM Shock and Wear |
DMK25† | Micro-grain carbide providing higher wear resistance and good shock resistance for applications in tough stainless steels, high-temperature alloys, irons, and many tool steels. | ANSI C2-C3, ISO K15-K30, M15-M30 |
|
DMK25-TCI | High-performance medium- to high-temperature grade. Outstanding shock and wear resistance in steels, irons, and stainless steels. Best suited for materials < 44 Rc. | |||
DMK25-GLH | Premium high-temperature coating. Outstanding performance and wear resistance in high-heat applications involving tough stainless steels, high-temperature alloys, and many tool steels. | |||
MEDIUM Shock and Wear | DMP25 | High wear resistance/moderate shock resistance. Recommended for most steel and many ductile iron applications. | ANSI C5-C6, ISO P25-P40 |
|
DMP25-TCI | High-performance medium- to high-temperature grade. Outstanding wear resistance in steels and ductile. Best suited for materials < 44 Rc. | |||
DMP25-GLH | Premium high-temperature grade. Unbeatable performance and wear resistance in high-heat applications such as higher speed machining in steels (< 44 Rc) and ductile irons. | |||
NEW | DMP25-HM | Use HM for high-performance milling of tougher steels and tool steels. | ||
HARDEST Wear Resistance |
DMK15 | Highest wear resistance with reduced shock absorption capabilities. Micro-grain carbide provides excellent edge strength. Suitable for all materials under stable conditions. Optimum cast iron substrate. | ANSI C2-C3, ISO K15-K25, M15-M25 |
|
DMK15-TCI | High-performance medium- to high-temperature grade. Great for higher-speed gray iron applications and lighter cuts in steels <52 Rc or ductile iron. | |||
DMK15-GLH | Premium high-temperature grade. Unbeatable performance and wear resistance in high-heat applications such as harder steels, tough stainless steels, and high-temperature alloys. | |||
NEW | DMK15-HM | Use HM for the highest hardness in gray and ductile irons, as well as heat-treated steels. |
DMK30-GLH is a good first choice for most applications.
Additional coatings available on request. Contact us for details.
† DMK25 substrate is available for RHINO-CARB D and N geometries only.