Machining Tips for Mold & Die Shops

A smarter approach to machining chase pockets

Have you ever struggled to consistently achieve straight walls and accurate sizing when machining mold insert chase pockets?

This video quickly outlines a solid approach to roughing, semi-finishing, and finishing the walls and floor of a deep, straight-walled pocket, with an eye toward helping you cut cycle times and reduce costly zero cuts. A few key takeaways:

  • High-feed ramping is the fastest way to rough out a chase pocket, but strong air blast is very important.
  • Make sure you leave the right amount of stock for the semi-finishing and finish cuts.
  • The proper tooling, parameters and tool path make all the difference when trying to reduce deflection and execute straight, consistent semi-finish and finish cuts.
  • Create the best possible surface finishes by tackling the floor separately from the walls.


Milling application and demo videos

High-efficiency milling vs. high-feed ramping

Dynamic milling with a solid carbide end mill is all the rage, but you may be able to match – or beat – those removal rates and save significant money on tooling by ramping with indexable high-feed tooling.

Efficiently machining large-diameter holes

Efficiently machining large-diameter holes

Forget time-consuming starter holes and step cuts. High-feed helixing can shorten cycle times for large-diameter hole making to never-before-seen levels – even on a 40-taper machine.

3D milling tips

Tips for more efficient 3D milling

3D milling involves a variety of tools and tool paths. In less than 5 minutes, this video demonstrates three different 3D shapes, what tools we recommend for machining, suggested for path generation for each.

Maximize feed rate with radial chip thinning

Maximize feed rate with radial chip thinning

If you’re milling at less than 50% of your cutting tool diameter, you can minimize your cycle time – and maximize productivity – by properly adjusting your programmed feed per tooth.






Get more tech tips!

Join our email list or follow our social channels for regular tech tips. Need assistance with your application? Contact one of our technology specialists to review your parameters.

Subscribe to our YouTube channelFollow us on LinkedIn