Toroid High-Performance CNC-Pressed Inserts
New RHINO-CARB high-performance, CNC-pressed Toroid inserts from DAPRA are designed for very aggressive metal cutting and long tool life. Click here for special savings on these NEW inserts!
New thicker top clamps will allow you to use new CNC-pressed inserts with your existing Toroid cutters. Order TC-4-N for all "R4" inserts (1/2" I.C.) or TC-6-N for all "R5" and "R6" inserts (5/8" and 3/4" I.C.).
Important! These new, thicker inserts may cause your cutter to cut a slightly larger diameter than with the old-style inserts. Always measure tool diameter before use.
NEW RHINO-CARB Round "Button" InsertsNow Available:
- RPMH33-T (replaces 3/8" ground insert RDCH32-T)– R3
- RPMH33-D (replaces 3/8" ground insert RDCH32-D)– R3
- RPMH44-T (replaces 1/2" ground insert RDCH43-T) – R4 – Use new top clamp TC-4-N
- RPMH44-D (replaces 1/2" ground insert RDCH43-D) – R4 – Use new top clamp TC-4-N
- RPMH54-T (replaces 5/8" ground insert RXCH53-T) – R5 – Use new top clamp TC-6-N
- RPMH54-D (replaces 5/8" ground insert RXCH53-D) – R5 – Use new top clamp TC-6-N
Coming Soon:
- RPMH64 (3/4" round)
NEW CNC-Pressed Octagonal InsertsNow Available:
- OPMH442-T (NEW PRODUCT for 1/2" IC pockets!) – R4 – Use new top clamp TC-4-N
- OPMH442-D (NEW PRODUCT for 1/2" IC pockets!) – R4 – Use new top clamp TC-4-N
- OPMH544-T (replaces 5/8" ground insert OXCH-534-T) – R5 – Use new top clamp TC-6-N
- OPMH544-D (replaces 5/8" ground insert OXCH-534-D) – R5 – Use new top clamp TC-6-N
Coming Soon:
- OPMH644 (3/4” octagon)
NEW CNC-Pressed High-Feed InsertsComing Soon:
- HFDEH1305 (1/2" high feed)
CNC-Pressed Square Inserts*Now Available:
- SXEH-432-D (1/2" square) – R4
- SXEH-432-T (1/2" square) – R4
* RHINO-CARB SX Inserts are not new, and are therefore not eligible for our current Toroid promotion.
Dapra Toroid products are made in the USA.